Traxxas Ez Peak Charger Blinking Red (Simple Solution)

Traxxas ez peak charger blinking red indicates an error or warning. It could be due to a damaged battery, a poor connection, or overheating, among other things.

Traxxas provides an easy-to-use charger for their RC vehicles, but it’s not uncommon to encounter issues. Seeing a red blinking light on the charger can be frustrating, especially if you’re not sure what it means.

In this article, I’ll delve into the common causes of the EZ peak charger’s red blinking light and how to fix them.

Understanding The Traxxas Ez Peak Charger

If you are a fan of remote control cars and trucks, you have likely heard of Traxxas and their ez peak charger. This high-tech device is designed to recharge your vehicle’s battery, allowing you to keep the fun going longer.

  • The Traxxas ez peak charger is a compact, all-in-one battery charger specifically designed for Nimh or lipo batteries.
  • It features advanced high-resolution peak detection, storage mode, and balance charging capabilities to ensure maximum battery life and performance.
  • The charger comes with a built-in cooling fan, which helps prevent overheating during extended use.

Parts And Function Of Traxxas Ez Peak Charger

Before we dive into what causes the Traxxas ez peak charger to blink red, let’s first examine its various parts and functions:

  • Charging Ports: The charger features two charging ports, which allow you to simultaneously charge two batteries at once.
  • Led Indicators: The EZ peak charger has four led lights that indicate the charging status of each battery. They are red when charging, green when fully charged, and blinking red when there is a problem.
  • Cooling Fan: The built-in cooling fan helps to dissipate heat during charging, keeping your batteries and charger safe.
  • Storage Mode: The Traxxas ez peak charger also has a feature called “storage mode,” which helps to maintain your battery’s longevity by automatically discharging or charging it to a specific level.
  • Charging Modes: The charger supports several charging modes, including fast charging, balance charging, and storage mode.

What Causes The Traxxas Ez Peak Charger Blinking Red?

The most common cause of the Traxxas ez peak charger blinking red is that there is an issue with the batteries being charged. However, there are a few other reasons why the charger might blink red:

  • Battery Overheating: If the battery gets too hot during charging, the charger will stop and will blink red.
  • Battery Connection: If the battery is not properly connected to the charger, it will blink red.
  • Battery Error: If there is an internal error with the battery, the charger will blink red.

Here are some other possible causes of the issue:

  • The battery pack is too hot or too cold to charge.
  • The battery pack is damaged or has a low voltage.
  • The charging connectors are dirty or corroded.
  • The battery pack is too old and needs to be replaced.

Types Of Problems Associated With Traxxas Ez Peak Charger

Here are some of the most common Traxxas ez peak charger problems:

  • Traxxas ez peak charger not charging
  • Traxxas ez peak charger not turning on
  • Traxxas ez peak charger charging erratically
  • Traxxas ez peak charger only charges to a certain percentage

Easy Solutions For Resolving Various Charging Problems

  • Ensure that the battery pack is firmly connected to the Traxxas ez peak charger.
  • Check the temperature of the battery pack, and let it cool down or warm up to room temperature if necessary.
  • Inspect the battery pack for signs of damage or low voltage, and replace or charge the battery as needed.
  • Clean the charging connectors and make sure they’re free of dirt and corrosion.
  • Replace an old battery pack with a new one.

By identifying the types of problems, possible causes, and quick and easy solutions, you can get back to enjoying your Traxxas rc vehicle in no time.

Safety Precautions For The Troubleshooting Process

When dealing with electronic devices, it’s crucial to take the necessary safety precautions to avoid any potential harm or damage. Before troubleshooting your Traxxas ez peak charger, keep these safety tips in mind:

  • Always unplug the charger before attempting to perform any maintenance or troubleshooting tasks.
  • Avoid touching any exposed parts of the charger or battery while they are operating or have been recently in use.
  • Use only the provided charging cables and power adapters to avoid short-circuiting or overheating issues.
  • Avoid exposing the charger or battery to extreme temperatures, as this could damage the internal components.

Checking The Battery And Connections

If your Traxxas ez peak charger is blinking red, the first thing to check is the battery and connections. Follow these steps to troubleshoot:

  • Check the Battery Voltage: Use a multimeter or voltmeter to measure the battery voltage. If the voltage is low, the battery may need to be charged.
  • Check the Battery Connections: Make sure the connections between the battery and charger are secure and clean. If there is any corrosion or debris on the connections, use a clean cloth to wipe them off.
  • Inspect the Charging Cable: Check the charging cable for any damage or fraying. If the cable is damaged, it may need to be replaced.

Resetting The Charger

If checking the battery and connections doesn’t resolve the blinking red light, try resetting the charger. Follow these steps to reset your Traxxas ez peak charger:

  • Unplug the charger from the power source and remove the battery.
  • Wait for at least 10 minutes to allow the internal components to cool down.
  • Reconnect the battery and plug the charger back into the power source.
  • Turn on the charger and see if the blinking red light has stopped.

Updating The Charger Firmware

If resetting the charger still doesn’t solve the issue, the next step is to update the charger firmware. Follow these steps to update your Traxxas ez peak charger firmware:

  • Download the latest firmware from the Traxxas website.
  • Connect the charger to your computer using a USB cable.
  • Run the firmware update software and follow the on-screen instructions to update the firmware.
  • Once the update is complete, disconnect the charger from your computer and reconnect it to the power source.

Remember to always follow the safety precautions and use the recommended charging cables and power adapters to ensure the longevity of your charger and batteries.

Frequently Asked Questions 

Can I Still Use The Traxxas Ez Peak Charger When It’S Blinking Red?

It’s not recommended to use the traxxas ez peak charger when it’s blinking red, as it indicates a potential risk or malfunction that may damage your battery or charger and cause hazards. Wait until the issue is resolved and the charger shows a steady green light before using it again.

Is Overheating A Common Issue With The Traxxas Ez Peak Charger?

While the Traxxas Ez Peak Charger is designed to handle demanding charging tasks, prolonged usage without allowing the charger to cool down can lead to overheating. It is important to take breaks during charging sessions and let the charger cool down before resuming its use.

How Do I Reset The Charger?

To reset the Traxxas Ez Peak Charger, locate the reset button on the charger. Press and hold the reset button for a few seconds, then release it. The charger will undergo a reset process, and you can check if the blinking red light issue is resolved.


The Traxxas Ez Peak Charger blinking red can be a frustrating issue, but by following the troubleshooting solutions provided in this guide, you can overcome the problem and enjoy uninterrupted charging for your Traxxas RC batteries.

Remember to check the battery connection, inspect the charging cables, ensure a stable power source, and consider a reset if needed.

David Gaskill

Leave a Comment

Your email address will not be published. Required fields are marked *